OptiPoint 420 Advance
From Pbxnsip Wiki
Contents |
[edit]
Siemens OptiPoint 410/420 advance
Version 6.0.52 and on supports the Siemens OptiPoint 400/4200 phones on configuration manually for now.
In order to configure such a phone, you need to do the following steps:
[edit]
Preparing Configuration manually
As with any other phone, the phone boots up as DHCP as default, after it gets the IP address, it will be flashing on main screen which is “ex: 10.1.10.35/no server”. From that point on, you pretty much can configure the phone via web.
[edit]
via the web
To access via the web, you’re simply to enter https://ip.address or http://ip.address:8085 which bringing you to OptiPoint 410/420 main screen. Then click on administrator, it will asks for a login password which is “123456” by default.
[edit]
Administration menu
Click on SIP environment under System, it will bring to SIP Environment menu which you input the right information such as extension, registration IP address and so forth. Then click on “Submit” bottom to save the change, and reboot the phone by un-plus the cable or enter the soft key order ( -, +, *, 2, and then hit check bottom on phone).
