User Mailbox Settings

From Pbxnsip Wiki

The user may decide if the mailbox should be enabled or not. For this purpose, the web page offers the setting "Mailbox Enabled".

As with the redirection setting, the user may override the default setting until the PBX redirects the call to the mailbox. This can be done in the setting "Time until mailbox picks up".

The "Announcement Mode" can have the following values:

• If the user selects the "Anonymous Announcement" mode, the PBX will just read out the number of the extension.

• If the user selects "Name Announcement" the PBX will pay back the recorded name of the extension, if present.

• The setting "Personal Announcement" will read out the recorded announcement of the extension, if present.

If the PBX should send a notification to registered phones, the setting "Send message waiting indication" must be turned on.

If the PBX should call the cell phone after a message has been recorded, the setting "Call cell phone when new message arrives" needs to be turned on. The PBX will charge the extension for this call.

If the mailbox should be shared with other extensions, those extensions can be listed (separated by space) in the setting "Share the mailbox with the following extensions". If the mailbox does not require a PIN code, those extensions can directly dial into the mailbox and listen to messages. Those extensions will also receive the message waiting indication, if the sending has been activated and the phones register for MWI events.