Vegastream
From Pbxnsip Wiki
Vegastream [1] offers various models for PSTN to SIP conversion.
Contents |
[edit]
Configuration of an Vega 50 6x4 ISDN Gateway
[edit]
The environment of this configuration
The Vega and the pbx are in one subnet. So there are not NAT or other Firewall problems.
Here is the Version I work with:
VEGA-6x4 Runtime System
Version: 11.02.07.5
Image: VEGA-6x4_R075S001 Nov 25 2005 11:38:45
Bootstrap System
Version: 1.02
ISDN Interface
Version: DSL card: FPGA version 0, modstate 0
FLASH Partition Information:
Partition 1: SIP Firmware (ACTIVE)
Version: 11.02.07.5
Image: VEGA-6x4_R075S001 Nov 25 2005 11:38:45
[edit]
The Vega documentation
Use the step by step configuration guide from the vegaassist website. For download you have to be registered.
The current version of the documentation:
Version 0.4 from 28 February 2006 For use with Vega 50 5x4 BRI - SIP version 11.02.07.5_S001 or greater
Do not use previous versions of this documentation. That's the documentation that work for me!
[edit]
My Vega change log report
After you configuration work the Vega change Log should look something like this:
Report on configuration changes
Configuration changes:
Key: CU: Changed from factory and unsaved.
C-: Changed from factory and saved.
-U: Not changed but unsaved.
[dns.1]
C- ip=192.168.x.y ! The IP of your DNS-Server
*factory=0.0.0.0
[dsl.port.1]
C- tei=40
*factory=0
[dsl.port.1.isdn]
C- dtmf_dial_timeout=5
*factory=2
[dsl.port.2]
C- nt=0
*factory=1
[dsl.port.3]
C- tei=40
*factory=0
[dsl.port.4]
C- bus_master_priority=1
*factory=0
C- nt=0
*factory=1
C- tei=40
*factory=0
[http_server]
C- lan_profile=1
*factory=3
[lan]
C- name=vega01.xy.de ! FQDN of the Vega-Gateway
*factory=this_hostname
[lan.gateway]
C- ip=192.168.x.z ! Your def. Gateway
*factory=0.0.0.0
[lan.host.2]
C- ip=192.168.x.y
*factory=New entry
C- name=xy.de ! Static host entries as you need it
*factory=New entry
[lan.if.1]
C- ip=192.168.x.y ! The IP of your Vega-Gateway
*factory=0.0.0.0
C- use_dhcp=0
*factory=1
[lan.if.1.phy]
C- 10baset=0
*factory=1
[lan.if.2] ! LAN 2 is not used
C- ip=192.168.111.111 ! you can set any network you do not need
*factory=0.0.0.0
C- subnet=255.255.255.255
*factory=255.255.255.0
[lan_profile.1]
C- name=LAN_1
*factory=Management
[lan_profile.2]
C- lan_interface=1
*factory=2
C- name=LAN_2
*factory=Calls
[lan_profile.3]
C- name=LAN_1&2
*factory=All
[logger.syslog.server.1]
C- ip=-a
*factory=0.0.0.0
[logger.syslog.server.1.option]
C- debug=1
*factory=0
[media.capset.1]
C- caps=3,2,1,9
*factory=1,6,2,3
[ntp]
C- ip=192.168.x.y ! The IP of your time server
*factory=0.0.0.0
C- local_offset=-0100
*factory=0000
C- poll_interval=2400
*factory=0
[planner.profile.1]
C- name=ISDN_to_LAN
*factory=default
[planner.profile.1.plan.1]
C- dest=IF:9901,TEL:<1>
*factory=IF:<1>,TEL:<2>
C- group=0
*factory=1
C- name=From_ISDN
*factory=incoming_lan
C- srce=IF:030[1234],TEL:<.*>
*factory=IF:9901,TEL:<....><.*>
[planner.profile.2]
C- enable=1
*factory=New entry
C- name=LAN_to_ISDN
*factory=New entry
[planner.profile.2.plan.1]
C- cost=0
*factory=New entry
C- dest=IF:0301,TEL:<1>
*factory=New entry
C- group=0
*factory=New entry
C- name=From_LAN
*factory=New entry
C- srce=IF:9901,TEL:<.*>
*factory=New entry
[sip]
C- PRACK=supported
*factory=off
C- alt_domain=-a
*factory=abcdefghijwhatever.com
C- capset=1
*factory=2
C- enable_modem=0
*factory=1
C- reg_domain=xy.de ! your Domain configured in pbxnsip
*factory=abcdefghijwhatever.com
[sip.auth.user.1]
C- enable=1
*factory=0
C- password=YourTrunkPassword ! your passord configured in pbxnsip-trunk
*factory=user01
C- srce=IF:.*
*factory=IF:0301
C- suffix_token_index=0
*factory=1
C- username=YourTrunkUsername ! your username configured in pbxnsip-trunk
*factory=01
[sip.proxy.1]
C- enable=1
*factory=0
C- ipname=192.168.x.y ! The IP of your pbxnsip machine
*factory=0.0.0.0
[snmp.mib2.system]
C- sysContact=ab@xy.de
*factory=www.abcdefghijwhatever.com
C- sysLocation=Serverraum
*factory=PlanetEarth
[telnet]
C- lan_profile=1
*factory=3
[users.admin]
C- timeout=3600
*factory=240
Advanced configuration changes:
Key: CU: Changed from factory and unsaved.
C-: Changed from factory and saved.
-U: Not changed but unsaved.
[_advanced]
C- boot_debug=0
*factory=3
[_advanced.lan.port_range.1]
C- max=64512
*factory=19999
C- min=49152
*factory=10000
[_advanced.sip]
C- use_maddr_in_contact=1
*factory=0
[_advanced.sip.sdp] ! This setting is important
C- fqdn=0 ! otherwise you will have one way audio
*factory=1 ! in call setups from the Vega
C- sess_desc_connection=1
*factory=0
